Shanghai Sunland Industrial Co., Ltd is the top manufacturer of Personal Protect Equipment in China, with 20 years’experience. We are the Chinese government appointed manufacturer for government power,personal protection equipment , medical instruments,construction industry, etc. All the products get the CE, ANSI and related Industry Certificates. All our safety helmets use the top-quality raw material without any recycling material.
What standard should a good motorcycle helmet meet
We provide exclusive customization of the products logo, using advanced printing technology and technology, not suitable for fading, solid and firm, scratch-proof and anti-smashing, and suitable for various scenes such as construction, mining, warehouse, inspection, etc. Our goal is to satisfy your needs. Demand, do your best.
Professional team work and production line which can make nice quality in short time.
The professional team provides 24 * 7 after-sales service for you, which can help you solve any problems
Safety ,helmets, don’t actually come stamped with an expiration ,date,, but they do have a ,date of manufacture, stamp that you can use to calculate the maximum lifespan. The stamp is as easy to read as a clock face, but it’s up to you to figure out when the ,helmet, should be replaced. While the
12/4/2012, · Samshield ,Helmets,: The 5 year rule applies, starting at the ,date of manufacture,. Troxel ,Helmets,: Troxel recommends replacing a ,helmet, 5 years from the ,date, of purchase from a retail store. GPA: We do recommend to change the ,helmet, every 5 years if it …
Arai recommend replacing your ,helmet, 7 years after ,date of manufacture, and 5 years after ,date, of purchase to maintain the maximum levels of protection. The EPS liner is effectively the shock absorber of your ,helmet,, absorbing the force of an impact onto the shell.
Each ,helmet,, when manufactured, has a year and month ,of manufacture, stamped onto the inside of the shell near the peak for easy reading. In the first image on the left the arrow in the stamp points to the month and the year overlays the arrow. So the arrow Points to 9 and the number is 04 means that the ,helmet, was manufactured in September 2004.
Service life, of a ,helmet,: A ,helmet's service life, starts when it is actually handled to the worker and placed in ,service,. This ,date, should be recorded when the ,helmet, is ... the ,date of manufacture, [shell injection], not the actual starting ,date, of use, as the period between manufacturing
The lifespan of your hard hat starts the day you receive the equipment, not the ,manufacture date, inscribed within the ,helmet,. OSHA Requirements – Section 1926.100 As a general note, OSHA requires all laborers to wear protective ,helmets, when working in areas where there is a possibility of head injury from falling objects, collisions, or electrical shock and burns.
Three years hence remove the ,helmet, from use or earlier if the ,helmet, has changed in colour, exhibits any signs of wear, or damage due to impact or deterioration (AS/NZS 1800:1998 3.4). If the sticker has not been used, replace the ,helmet, three years from the ,manufacture date, stamp under the brim or peak of the ,helmet,.
Warranty vs. Useful ,Life, Bullard hard hats and caps have a two (2) year warranty from ,date of manufacture,. As long as the product is stored properly, according to manufacturer’s recommendations, the actual “useful ,life,” of the hard hat does not begin until the ,helmet, is placed in ,service,.
No they don't: hard hats, or safety ,helmets,, must be replaced if damaged, no matter how new or old they are, and they also have a 'notional' use by ,date, and/or working ,life,. Section 3 of Australian Standard AS/NZ 1800:1998 Occupational Protective ,Helmets, - Selection, care and use provides advice on the "Care and Maintenance of Occupational Protective ,Helmets,".